Mid-Side (M/S) recording is a stereo microphone technique that captures a forward-facing Mid signal and a sideways-facing, figure-8 Side signal at nearly the same acoustic position. Rather than recording conventional left and right channels directly, it records two components that can be combined into stereo through a sum-and-difference matrix. The balance between those components sets the apparent stereo width, even after the microphones have been packed away.

The Mid microphone mainly establishes the forward perspective. The Side microphone responds to sound arriving from either side, with opposite electrical polarity for its two lobes. A decoder combines those signals to produce conventional left and right playback channels. With a symmetrical decoder, the Side information cancels when left and right are summed to mono, leaving the Mid signal after any overall gain scaling.

This makes M/S particularly useful when the final stereo width is uncertain during recording, such as in film, broadcast, live ambience, and acoustic ensemble work. It does not eliminate the need for good microphone placement: the Mid pattern, Side microphone orientation, acoustics, and source distance still determine what was captured in the first place.

How the Mid and Side microphones capture sound

A conventional M/S array uses two different pickup directions, not two microphones pointed at opposite ends of the soundstage.

  • Mid (M): A microphone aimed toward the principal sound source. A cardioid is common, but other patterns can be used, including omnidirectional, supercardioid, or figure-8. The selected polar pattern changes the forward focus and the decoded stereo image.
  • Side (S): A figure-8 microphone oriented sideways, with its positive-polarity lobe pointing left when viewed from behind the array. Its opposite lobe faces right and produces the inverse-polarity response to an otherwise comparable sound.

The two capsules are mounted as close together as their housings and suspension permit, commonly one above the other. This is a coincident microphone technique in principle, although two physical diaphragms cannot occupy an identical point in space. Keeping the acoustic centers close minimizes spacing-related time differences that can complicate a mono sum.

The Side microphone’s null axis points forward and backward. A source centered directly in front of an ideal sideways figure-8 produces little Side signal, while an off-center source contributes Side information according to its angle and frequency. Real microphone patterns and positioning are not perfect: a source at the center can still contribute some Side signal through off-axis response, reflections, or misalignment.

Component Facing direction Captures Practical consequence
Mid microphone Toward the main sound source Direct and reflected sound within its pickup pattern Sets the main tonal perspective and the mono reference
Side microphone Figure-8 lobes left and right Sound from both sides, in opposite polarity Provides the difference information used for stereo separation
Close capsule alignment Approximately the same point Similar arrival-time perspective Reduces the timing differences introduced by a spaced array
M/S decoder Signal processing, not a third microphone Combines M and S mathematically Produces left/right audio with adjustable width

A useful correction to a common shorthand: the Mid does not contain only dry, central sound, and the Side does not contain only room ambience. Both microphones can receive reflected sound. Their directionality and polarity determine how those reflections appear in the matrix. Schoeps’ explanation of M/S microphone technique shows how the chosen Mid pattern and relative Side gain change the virtual left/right pickup patterns.

The M/S matrix: turning two microphone signals into stereo

The decoder’s basic operation is simple. It adds Side to Mid for the left speaker and subtracts Side from Mid for the right speaker:

Left = Mid + Side
Right = Mid – Side

More generally, an adjustable Side gain k gives:

L = M + kS
R = M – kS

The notation assumes that the Side microphone’s positive lobe faces left. If the microphone faces the other way, the perceived left/right orientation will be reversed unless the signal routing or polarity is corrected.

To understand the second equation, remember that subtracting a signal is equivalent to adding a polarity-inverted copy. The decoder produces one Side contribution for the left channel and an equal, inverted Side contribution for the right channel. The two Side contributions must remain equal in level and opposite in polarity for normal M/S decoding and its expected mono behavior.

Why the Side signal disappears in mono

Add the decoded left and right signals:

L + R = (M + kS) + (M – kS) = 2M

The Side terms cancel exactly in the mathematical matrix. A conventional mono average, (L + R)/2, therefore returns M with this unnormalized convention. Other decoders apply a common output scaling factor, so the mono level can differ without changing the principle.

This is what people mean when they call M/S mono-compatible. It is a strong and useful property, but the qualification matters. It assumes a correctly oriented, symmetrical matrix and no later channel-specific processing that breaks the relationship. It also does not mean a physically imperfect array contains no acoustic timing difference whatsoever. The mono result is essentially the Mid microphone’s capture, including whatever room tone or coloration that microphone recorded.

What changes when the Side level changes?

If k is zero, L and R each carry Mid, so the decoded image is mono. Increasing the Side level makes off-center sources contribute more strongly to the left/right difference, generally widening the playback image. Reducing Side narrows it. Excessive Side level can push an image beyond a useful center-to-edge balance or make the room and rear pickup more prominent than intended.

This is not simply a volume control for the room. Raising the Side also changes the effective pickup patterns of the virtual left and right microphones. The chosen Mid polar pattern matters: a cardioid Mid and an omni Mid do not decode into the same virtual patterns at the same Side setting. Schoeps documents the pattern relationships in its M/S technique guide.

Different hardware and plug-ins may normalize the matrix differently. For example, DPA’s MS Recording definition expresses left and right as (M + S)/√2 and (M – S)/√2. Some processors use half-scaling conventions instead. These are choices about level calibration, not competing explanations of M/S. Do not compare Side gain, output peaks, or perceived loudness across decoders without checking their normalization and headroom.

How to set up an M/S microphone pair

An M/S recording can be made with two compatible separate microphones or a dedicated stereo microphone containing the necessary elements.

  1. Choose the Mid pattern for the subject. Start with a cardioid if you need a straightforward forward-facing perspective. An omni Mid can capture more diffuse sound, while a narrower directional pattern may emphasize a specific subject and reject some off-axis sources. Those are tendencies shaped by the actual microphone, not guaranteed tonal outcomes.
  2. Aim Mid at the intended center. Decide where the recording’s primary focus belongs before adjusting stereo width. The center of a performance is not always the geometric midpoint between its performers.
  3. Turn the figure-8 Side microphone across the stage. Place its positive lobe toward the left side, as viewed from behind the microphones. Aim the front/rear null axis along the Mid direction. Check the microphone’s manufacturer markings rather than assuming which face is positive.
  4. Align the capsules closely. Use an appropriate stereo mount or suspension to keep the acoustic centers near each other. Check the microphone bodies, mounting clearance, vibration control, wind protection, and cable strain. Physical distance between clips is not a reliable measure of capsule alignment.
  5. Record M and S as separate synchronized channels. Name the tracks Mid and Side, preserve the channel assignment, and leave enough headroom for peaks. Use phantom power only as specified for each microphone.
  6. Monitor through an M/S decoder. Raw M/S channels are not normal left and right speaker feeds. Listen to the decoded stereo signal and compare it with its mono fold-down before committing to placement.
  7. Adjust placement before using extreme width settings. Move the pair and refine the Mid direction to improve direct/room balance. Increasing Side cannot restore instruments missing from the recorded perspective.

If the chosen recorder offers M/S linking, confirm whether the decoder affects the headphone monitor, the left/right mix, the recorded isolated tracks, or some combination. Those are device-specific routing choices. A recorder that saves raw M and S while monitoring decoded L/R provides useful post-production flexibility. The Sound Devices 833 user guide is one example of professional equipment with M/S-aware channel linking; consult the appropriate manual for the exact firmware and recording options.

A manual M/S decoder in a DAW

When the DAW has no dedicated M/S decoder, build the matrix with three playback tracks or equivalent routing:

  1. Route the recorded Mid track to the center of a stereo output.
  2. Duplicate the recorded Side track, retaining sample alignment.
  3. Pan the original Side copy hard left and the duplicate hard right.
  4. Invert the polarity of the right-hand Side copy, using an audio polarity control. Do not substitute an arbitrary time-delay or all-pass effect for polarity inversion.
  5. Keep both Side faders at equal gain. Adjust their levels together relative to Mid until the stereo balance is useful.
  6. Check mono and output peaks. Save the routing as a template so the Side copies are not accidentally unlinked later.

The decoded result should be L = M + S and R = M – S, subject to the fader and bus scaling used. If the stereo image is reversed, check the original figure-8 orientation, track assignments, and Side polarity. If the image leans to one side, check both Side fader values and the Mid/Side track gains before moving microphones.

Do not pan the original raw Mid and Side tracks hard left and right and call that decoded M/S. A raw Side channel contains opposite-polarity front and back lobes; it is not a ready-made right speaker channel.

Where M/S recording works well, and where it can disappoint

For broadcast and production sound, the combination of compact mounting, a stable mono reference, and adjustable stereo width is valuable. A forward Mid can prioritize dialogue or a sound effect, while Side information provides a controllable impression of the surrounding scene. The appropriate Mid pattern may differ between indoor dialogue, a distant exterior subject, and general ambience.

For acoustic ensembles and choirs, M/S can create a focused center while preserving lateral localization and some room contribution. With an ensemble that spans a very wide angle, a particular Mid pattern and Side balance may struggle to provide a natural spread without making side sources unnaturally prominent. Microphone position and the size of the sound stage still matter.

For solo instruments, the method can add spatial information to a piano, guitar, percussion instrument, or small group of performers when a single mono microphone feels too narrow. But putting the array too close may exaggerate differences between different parts of an instrument. Moving it farther away often integrates the instrument more coherently, at the cost of adding room sound.

For field ambience, post-adjustable width is helpful when recordings will be used under picture or combined with other sound beds. An M/S pair may sound less diffuse or enveloping than an appropriately spaced array because it does not deliberately encode the larger intermicrophone time differences of the spaced technique. That is an acoustic tradeoff, not a defect.

Recording need Why M/S may help What still needs checking
Dialogue plus surrounding atmosphere Forward Mid and adjustable Side contribution Mid directivity, speech intelligibility, wind and handling noise
Choir or small ensemble Compact center-oriented array with controllable width Source angle, distance, room reflections, Mid polar pattern
Piano or acoustic guitar Adjust stereo separation after recording Tone of each part of the instrument, off-axis coloration
Location ambience Raw M/S tracks can be retained for later width decisions Diffuse-field character and unwanted rear/side pickup
Mono broadcast or single-speaker playback Symmetrical decoding reduces directly to the Mid reference Correct matrix, channel-specific processing, mono level

The contrast with XY stereo is practical: XY records two normal left/right channels from a near-coincident viewpoint, whereas M/S normally records encoded components that must be decoded. Both are fundamentally coincident techniques, but the M/S format provides especially direct width control after recording. ORTF stereo adds deliberate spacing between its cardioids and therefore uses both level and arrival-time cues. A-B stereo uses larger spacing as a central part of its technique.

A Blumlein pair also uses coincident microphones, but its conventional arrangement consists of two crossed figure-8 capsules, each assigned directly to a left or right signal. M/S can use a figure-8 Mid and a figure-8 Side, yet the signal format and microphone orientation should not be treated as synonyms for the standard Blumlein pair. The general geometry and pattern theory belong to those separate glossary entries.

M/S recording versus M/S processing in mixing

The name Mid-Side also appears on equalizers, compressors, stereo-width controls, and mastering tools. Those processors can convert an already recorded L/R mix into mathematical sum-and-difference components. No Mid and Side microphones are required to process a conventional stereo file this way.

In a common L/R-to-M/S encoding convention:

M = (L + R) / 2
S = (L – R) / 2

Recombining those components recovers the original L and R. Other plug-ins scale the signals differently while preserving the inverse relationship. The resulting M component emphasizes material common to left and right, and S represents their difference. This does not mean Mid is a perfectly isolated lead vocal or Side contains only reverberation. Any signal distributed across the channels can contribute to both components depending on its relative level, polarity, and timing.

An M/S-capable EQ can alter the tonal balance of the common and difference components separately. A width control may change the Side gain before decoding. Such processing is often useful, but it changes the existing stereo information; it does not transform the original recording into a true M/S microphone pickup or recover a missing acoustic perspective.

For example, reducing low-frequency Side energy can make bass appear more centered if the original mix contains low-frequency differences. It does not automatically improve every mix, and a fixed cutoff frequency such as 100 Hz is not a universal mastering rule. Strong Side boosts, unequal processing, or nonlinear effects can also change peaks, balance, and mono behavior. Check the final decoded signal, not just the appearance of the Mid and Side meters.

M/S microphones and a documented hardware example

A dedicated stereo microphone with an M/S arrangement can simplify capsule alignment and routing. Some models provide raw Mid and Side signals, some output internally decoded left and right, and some offer both options. The position of the decoding matrix in the signal chain determines how much flexibility remains at mix time.

One documented example is the Audio-Technica BP4029 stereo shotgun microphone. It has an independent line-cardioid Mid element and a figure-8 Side element. Its selectable modes include separate M/S outputs and two internally decoded L/R modes, labeled wide and narrow. The microphone uses a 5-pin XLR output and includes a breakout cable to two 3-pin XLR connectors. These are product-specific functions, not features of every microphone described as M/S. Audio-Technica documents the operating modes on its BP4029 product page.

Affiliate disclosure: Product links to Thomann may earn the site a commission at no additional cost to the reader. The Audio-Technica BP4029 at Thomann illustrates a microphone with selectable encoded and decoded stereo output. It is useful as an example of the signal-flow choices; it is not evidence that a particular microphone will suit every recording situation.

An M/S system assembled from separate microphones allows a different choice of Mid pattern and Side transducer, at the cost of extra mounting, cabling, and routing. A stereo microphone with a fixed Mid/Side arrangement is faster to deploy but may restrict those choices.

Why an M/S setup sometimes sounds wrong

Symptom Likely cause What to try
Stereo image is reversed Positive Side lobe points right; Side polarity or output assignment reversed Check microphone markings and reverse the Side polarity or correct the decoder routing
Everything sounds nearly mono Side level is low, figure-8 orientation is wrong, or source is strongly centered Confirm Side signal is recorded and decoded, then review orientation and placement
Image is lopsided Left/right Side copies have unequal gains or one is delayed Match Side gain and alignment, verify left/right outputs
Sound becomes thin or unusual after summing to mono Decoder is asymmetrical, later L/R processing differs, or Mid capture is tonally unsuitable Rebuild the matrix, bypass downstream processing, evaluate Mid in isolation
Decoded channels clip even though raw tracks do not Summation increased peaks; matrix normalization or bus headroom insufficient Lower pre-decode or output gain, check plug-in scaling and peak meters
Ambience overwhelms the central source Side level is excessive or Mid orientation/pattern is unsuitable Reduce Side, adjust placement, consider a different Mid pattern
A raw M/S file plays strangely as stereo Mid is being sent left and Side right without decoding Apply an M/S-to-L/R decoder or the proper three-track matrix

A useful troubleshooting test is to mute both Side copies in the decoder. You should hear the Mid centered in both output channels. Restore both Side copies with identical gain, then invert only the right Side copy. Sum to mono: the Side contribution should disappear if the matrix is symmetrical. Once that works, refine stereo width while listening to the program material, not by following a fixed numerical setting.